Door Controller/Pinouts
From ESCTL
< Door Controller(Difference between revisions)
(→Connectors on board) |
|||
| Line 3: | Line 3: | ||
** 12V | ** 12V | ||
** 0V | ** 0V | ||
| − | * | + | * P2 - Power out to lock ('''NOTE''': The lock connector is the other way up on the board, when compared to P1) |
** 12V | ** 12V | ||
** 0V | ** 0V | ||
| − | ** Data 0 | + | * R1 - RFID Reader |
| − | ** Data 1 | + | ** 12V (Red, or Orange) |
| − | + | ** 0V (Black, or White) | |
| + | ** Data 0 (Green) | ||
| + | ** Data 1 (White) | ||
=== Keypad cable colours === | === Keypad cable colours === | ||
Revision as of 11:16, 3 August 2015
Connectors on board
- P1 - Power in (9-16V, 12V typical, depending on your lock)
- 12V
- 0V
- P2 - Power out to lock (NOTE: The lock connector is the other way up on the board, when compared to P1)
- 12V
- 0V
- R1 - RFID Reader
- 12V (Red, or Orange)
- 0V (Black, or White)
- Data 0 (Green)
- Data 1 (White)
Keypad cable colours
This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown).
| Arduino pin | Row/Col Name | Farnell | Colour |
| 5 | COL 3 | D | ORA' |
| 6 | COL 2 | E | ORA |
| 7 | COL 1 | F | GRN' |
| 8 | ROW # | G | GRN |
| 9 | ROW 7 | H | BLU' |
| 10 | ROW 4 | J | BLU |
| 11 | ROW 1 | K | BRN' |
Arduino Pinout
- A0 - Door Lock
- A1 - RQE
- A2 - iButton
- 3 - Data 0 / Data (Green)
- 4 - Data 1 / Clock (White)
- 5 - Keypad Col 3,6,9,#
- 6 - Keypad Col 2,5,8,0
- 7 - Keypad Col 1,4,7,*
- 8 - Keypad Row *,0,#
- 9 - Keypad Row 7,8,9
- 10 - Keypad Row 4,5,6
- 11 - Keypad Row 1,2,3
- 12 - Status LED (Red)
- 13 - Status LED (Green)
