Door Controller/Pinouts
From ESCTL
< Door Controller(Difference between revisions)
(Created page with "==== Connectors on board ==== * P1 - Power in (9-16V, 12V typical, depending on your lock) ** 12V ** 0V * R1 - RFID Reader ** 12V ** 0V ** Data 0 ** Data 1 ==== Arduino Pino...") |
|||
| Line 8: | Line 8: | ||
** Data 0 | ** Data 0 | ||
** Data 1 | ** Data 1 | ||
| + | |||
| + | |||
| + | === Keypad cable colours === | ||
| + | This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown). | ||
| + | |||
| + | {| class="wikitable" style="text-align:center;" | ||
| + | | Arduino pin || Row/Col Name || Farnell || Colour | ||
| + | |- | ||
| + | | 5 || COL 3 || D || ORA' | ||
| + | |- | ||
| + | | 6 || COL 2 || E || ORA | ||
| + | |- | ||
| + | | 7 || COL 1 || F || GRN' | ||
| + | |- | ||
| + | | 8 || ROW # || G || GRN | ||
| + | |- | ||
| + | | 9 || ROW 7 || H || BLU' | ||
| + | |- | ||
| + | | 10 || ROW 4 || J || BLU | ||
| + | |- | ||
| + | | 11 || ROW 1 || K || BRN' | ||
| + | |} | ||
| + | |||
Revision as of 00:03, 5 November 2014
Connectors on board
- P1 - Power in (9-16V, 12V typical, depending on your lock)
- 12V
- 0V
- R1 - RFID Reader
- 12V
- 0V
- Data 0
- Data 1
Keypad cable colours
This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown).
| Arduino pin | Row/Col Name | Farnell | Colour |
| 5 | COL 3 | D | ORA' |
| 6 | COL 2 | E | ORA |
| 7 | COL 1 | F | GRN' |
| 8 | ROW # | G | GRN |
| 9 | ROW 7 | H | BLU' |
| 10 | ROW 4 | J | BLU |
| 11 | ROW 1 | K | BRN' |
Arduino Pinout
- A0 - Door Lock
- A1 - RQE
- A2 - iButton
- 3 - Data 0 / Data (Green)
- 4 - Data 1 / Clock (White)
- 5 - Keypad Col 3,6,9,#
- 6 - Keypad Col 2,5,8,0
- 7 - Keypad Col 1,4,7,*
- 8 - Keypad Row *,0,#
- 9 - Keypad Row 7,8,9
- 10 - Keypad Row 4,5,6
- 11 - Keypad Row 1,2,3
- 12 - Status LED (Red)
- 13 - Status LED (Green)
