Door Controller/Pinouts

From ESCTL
< Door Controller(Difference between revisions)
Jump to: navigation, search
(Created page with "==== Connectors on board ==== * P1 - Power in (9-16V, 12V typical, depending on your lock) ** 12V ** 0V * R1 - RFID Reader ** 12V ** 0V ** Data 0 ** Data 1 ==== Arduino Pino...")
 
(→‎Arduino Pinout)
 
(5 intermediate revisions by one user not shown)
Line 3: Line 3:
 
** 12V
 
** 12V
 
** 0V
 
** 0V
−
* R1 - RFID Reader
+
* P2 - Power out to lock ('''NOTE''': The lock connector is the other way up on the board, when compared to P1)
 
** 12V
 
** 12V
 
** 0V
 
** 0V
−
** Data 0
+
* R1 - RFID Reader
−
** Data 1
+
** 12V (Red, or Orange)
 +
** 0V (Black, or White)
 +
** Data 0 (Green)
 +
** Data 1 (White)
 +
* tbc - RQE Switch. No connector on board yet, but connect RQE switch directly to:
 +
** A1
 +
** GND
 +
 
 +
=== Keypad cable colours ===
 +
This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown).
 +
 
 +
{| class="wikitable" style="text-align:center;"
 +
| Arduino pin || Row/Col Name || Farnell || Colour
 +
|-
 +
| 5  || COL 3 || D || ORA'
 +
|-
 +
| 6  || COL 2 || E || ORA
 +
|-
 +
| 7  || COL 1 || F || GRN'
 +
|-
 +
| 8  || ROW # || G || GRN
 +
|-
 +
| 9  || ROW 7 || H || BLU'
 +
|-
 +
| 10 || ROW 4 || J || BLU
 +
|-
 +
| 11 || ROW 1 || K || BRN'
 +
|}
 +
 
 +
=== Keypad + reader cable colours ===
 +
This is the suggested keypad colouring if using Cat5 cable and the esctl combined Mifare + keypad Wiegand reader.
 +
 
 +
{| class="wikitable" style="text-align:center;"
 +
| Arduino pin || Function || Reader cable || Cat5 Colour
 +
|-
 +
| 3  || Wiegand 0 || GRN || GRN
 +
|-
 +
| 4  || Wiegand 1 || WHT || GRN'
 +
|-
 +
| +12V  || Power || RED || BRN
 +
|-
 +
| 0V  || Ground || BLK || BLU
 +
|-
 +
| tbc || Buzzer || YEL || BLU'
 +
|-
 +
| tbc || LED || BLU|| BRN'
 +
|-
 +
|  || Bell A (N.O.) || ORA || ORA
 +
|-
 +
|  || Bell B (N.O.) || BRN || ORA'
 +
|-
 +
| || || GRY ||
 +
|}
 +
 
  
  
Line 14: Line 67:
 
* A1 - RQE
 
* A1 - RQE
 
* A2 - iButton
 
* A2 - iButton
 +
* A3 - Voltage Sense
 
* 3 - Data 0 / Data (Green)
 
* 3 - Data 0 / Data (Green)
 
* 4 - Data 1 / Clock (White)
 
* 4 - Data 1 / Clock (White)

Latest revision as of 16:04, 12 December 2020

Contents

[edit] Connectors on board

  • P1 - Power in (9-16V, 12V typical, depending on your lock)
    • 12V
    • 0V
  • P2 - Power out to lock (NOTE: The lock connector is the other way up on the board, when compared to P1)
    • 12V
    • 0V
  • R1 - RFID Reader
    • 12V (Red, or Orange)
    • 0V (Black, or White)
    • Data 0 (Green)
    • Data 1 (White)
  • tbc - RQE Switch. No connector on board yet, but connect RQE switch directly to:
    • A1
    • GND

[edit] Keypad cable colours

This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown).

Arduino pin Row/Col Name Farnell Colour
5 COL 3 D ORA'
6 COL 2 E ORA
7 COL 1 F GRN'
8 ROW # G GRN
9 ROW 7 H BLU'
10 ROW 4 J BLU
11 ROW 1 K BRN'

[edit] Keypad + reader cable colours

This is the suggested keypad colouring if using Cat5 cable and the esctl combined Mifare + keypad Wiegand reader.

Arduino pin Function Reader cable Cat5 Colour
3 Wiegand 0 GRN GRN
4 Wiegand 1 WHT GRN'
+12V Power RED BRN
0V Ground BLK BLU
tbc Buzzer YEL BLU'
tbc LED BLU BRN'
Bell A (N.O.) ORA ORA
Bell B (N.O.) BRN ORA'
GRY


[edit] Arduino Pinout

  • A0 - Door Lock
  • A1 - RQE
  • A2 - iButton
  • A3 - Voltage Sense
  • 3 - Data 0 / Data (Green)
  • 4 - Data 1 / Clock (White)
  • 5 - Keypad Col 3,6,9,#
  • 6 - Keypad Col 2,5,8,0
  • 7 - Keypad Col 1,4,7,*
  • 8 - Keypad Row *,0,#
  • 9 - Keypad Row 7,8,9
  • 10 - Keypad Row 4,5,6
  • 11 - Keypad Row 1,2,3
  • 12 - Status LED (Red)
  • 13 - Status LED (Green)
Retrieved from ‘http://www.esctl.co.uk/index.php?title=Door_Controller/Pinouts&oldid=187’
Personal tools
Namespaces

Variants
Actions
Navigation
Tools