Door Controller/Pinouts
From ESCTL
< Door Controller(Difference between revisions)
(→Connectors on board) |
(Add Mifare + keypad wiegand reader colours) |
||
| Line 34: | Line 34: | ||
|- | |- | ||
| 11 || ROW 1 || K || BRN' | | 11 || ROW 1 || K || BRN' | ||
| + | |} | ||
| + | |||
| + | === Keypad reader cable colours === | ||
| + | This is the suggested keypad colouring if using Cat5 cable and the esctl combined Mifare + keypad Wiegand reader. | ||
| + | |||
| + | {| class="wikitable" style="text-align:center;" | ||
| + | | Arduino pin || Function || Reader cable || Cat5 Colour | ||
| + | |- | ||
| + | | 3 || Wiegand 0 || GRN || GRN | ||
| + | |- | ||
| + | | 4 || Wiegand 1 || WHT || GRN' | ||
| + | |- | ||
| + | | +12V || Power || RED || BRN | ||
| + | |- | ||
| + | | 0V || Ground || BLK || BLU | ||
| + | |- | ||
| + | | tbc || Buzzer || YEL || BLU' | ||
| + | |- | ||
| + | | tbc || LED || BLU|| BRN' | ||
| + | |- | ||
| + | | || Bell A (N.O.) || ORA || ORA | ||
| + | |- | ||
| + | | || Bell B (N.O.) || BRN || ORA' | ||
| + | |- | ||
| + | | || || GRY || | ||
|} | |} | ||
Revision as of 10:01, 23 July 2017
Contents |
Connectors on board
- P1 - Power in (9-16V, 12V typical, depending on your lock)
- 12V
- 0V
- P2 - Power out to lock (NOTE: The lock connector is the other way up on the board, when compared to P1)
- 12V
- 0V
- R1 - RFID Reader
- 12V (Red, or Orange)
- 0V (Black, or White)
- Data 0 (Green)
- Data 1 (White)
- tbc - RQE Switch. No connector on board yet, but connect RQE switch directly to:
- A1
- GND
Keypad cable colours
This is the suggested keypad colouring if using Cat5 cable and Farnell 1130805 (ECO.12150.06.SP) keypad. It will leave one core spare (Brown).
| Arduino pin | Row/Col Name | Farnell | Colour |
| 5 | COL 3 | D | ORA' |
| 6 | COL 2 | E | ORA |
| 7 | COL 1 | F | GRN' |
| 8 | ROW # | G | GRN |
| 9 | ROW 7 | H | BLU' |
| 10 | ROW 4 | J | BLU |
| 11 | ROW 1 | K | BRN' |
Keypad reader cable colours
This is the suggested keypad colouring if using Cat5 cable and the esctl combined Mifare + keypad Wiegand reader.
| Arduino pin | Function | Reader cable | Cat5 Colour |
| 3 | Wiegand 0 | GRN | GRN |
| 4 | Wiegand 1 | WHT | GRN' |
| +12V | Power | RED | BRN |
| 0V | Ground | BLK | BLU |
| tbc | Buzzer | YEL | BLU' |
| tbc | LED | BLU | BRN' |
| Bell A (N.O.) | ORA | ORA | |
| Bell B (N.O.) | BRN | ORA' | |
| GRY |
Arduino Pinout
- A0 - Door Lock
- A1 - RQE
- A2 - iButton
- 3 - Data 0 / Data (Green)
- 4 - Data 1 / Clock (White)
- 5 - Keypad Col 3,6,9,#
- 6 - Keypad Col 2,5,8,0
- 7 - Keypad Col 1,4,7,*
- 8 - Keypad Row *,0,#
- 9 - Keypad Row 7,8,9
- 10 - Keypad Row 4,5,6
- 11 - Keypad Row 1,2,3
- 12 - Status LED (Red)
- 13 - Status LED (Green)
