View source for Master Controller/Operating System

== debian / Raspberry Pi setup ==

* Set the timezone if necessary
** dpkg-reconfigure tzdata

=== Second ethernet interface ===
If installed, edit /etc/network/interfaces along the lines of:
<pre>
auto lo

iface lo inet loopback

auto eth0
iface eth0 inet static
        address my.internal.ip.address
        netmask 255.255.255.0

allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp

# JMH - External interface. Could be dhcp
auto eth1
iface eth1 inet static
        address my.external.ip.address
        netmask 255.255.255.224
        gateway my.external.gateway.ip
</pre>

and edit /etc/default/ifplugd as follows:
<pre>
#INTERFACES="auto"
INTERFACES="eth1"
#HOTPLUG_INTERFACES="all"
HOTPLUG_INTERFACES="eth1"
</pre>

== Package Installation ==
* apt-get install mysql-server xinetd libdevice-serialport-perl libclass-dbi-mysql-perl libnet-ldap-perl
** New password for MySQL root user: ****
* If running MySQL server on same machine as esctl, edit /etc/mysql/my.cnf and comment out "bind-address = 127.0.0.1" line